Skip to Content
Find More Like This
Return to Search

Recovering rare earth metals using bismuth extractant

Ames Laboratory

Contact AMES About This Technology

Technology Marketing Summary
 
Ames Laboratory and Critical Materials Institute researchers have developed a two stage extraction process to selectively separate neodymium and dysprosium from spent NdFeB magnets.
 
Description
 
Many of the technologies important to reducing green-house gas emissions involve the use of permanent magnets, specifically NdFeB magnets.  Found in automotive motors, consumer electronics and in wind turbine generators, these high-energy permanent magnets play an important in our everyday lives.  Despite their widespread use and the incorporation of rare earth elements in the magnets, it is estimated that perhaps as little as one percent of rare earth metals are recycled from spent and waste magnets.

 

One of the factors that impact recycling is the harsh conditions that are typically involved in the recycling process.  ISURF #04150 and #04391 use pyrometallurgical techniques to selectively extract the rare earth elements from NdFeB magnets, leaving the iron and boron residue behind.  The first extraction step uses liquid magnesium to selectively remove neodymium from the magnet, while the second step utilizes liquid bismuth to remove the dysprosium.  The rare earth elements are readily recovered from the extractant using rotary evaporation.

 

Benefits
 
• Process may be used in either one step (recovery of both light and heavy rare earth elements) or in two steps (recovery of light and heavy rare earth elements separately) process
• Easy recovery of target metals from extractant by rotary evaporation
• Near quantitative yield of rare earth elements
 
Applications and Industries

Rare earth element recycling from spent or scrap magnets

More Information

Patent applied for. 

ISURF Direct Link: http://isurftech.technologypublisher.com/technology/21024

Technology Status
Technology IDDevelopment StageAvailabilityPublishedLast Updated
4391PrototypeAvailable12/07/201712/07/2017

Contact AMES About This Technology

To: Craig Forney<licensing@iastate.edu>